Royal Selangor Releases Limited Edition C-3PO Figurine

Royal Selangor is no stranger to pop culture collaborations, having produced figurines from the likes of the DC series featuring Batman in full combat mode, to the Millennium Falcon from Star Wars, as well as Darth Maul, Anakin, and a lightsaber replica in pure pewter.

Now, in conjunction with an on-going collab with Walt Disney Southeast Asia, Royal Selangor adds another model into the Star Wars line-up, featuring none other than protocol droid, C-3PO. The model references one of the scenes from the original trilogy, more specifically, Star Wars: Episode IV – A New Hope.

Unlike the other models, this limited edition figurine comes fully coloured. 3PO is portrayed with a silvery lower right leg, in a stance inspired by the scene when 3PO and R2D2 were stranded on Tatooine. The base too, reflects the environment on the desert planet. Made completely from gilt pewter, the figurine is finished off with the aforementioned silver leg and a selectively stained black torso with satin highlights.

No prices as of yet, but we estimate it to be around RM 2000. Royal Selangor doesn’t do standard runs though. Only 5000 units of the C-3PO model will be made and are sold at Royal Selangor outlets. Better be quick if you wanna cop!

 

 

Juventus Debuts Their Third Kit, Made With Parley Ocean Plastic

Parley Is No Longer Just Shoes

With the World Cup now over, all of football’s top tiers are back to getting ready for the upcoming start of their leagues for the new 2018/2019 season. The eyes are currently on Juventus though, not just because of possibly the most surprising transfer of all time (Ronaldo signs for Juventus), but also because the Italian club’s third kit is made with Parley plastic.

Adidas’s partnership with Parley is already a well documented affair, with the non-profit organisation putting out shoes incorporated with ocean plastics which were thought to be a limited release affair, but is now akin to the main lineup almost. From the Ultraboost, EQT, NMD CS1, and Alphabounce, Parley is omnipresent in Adidas’s flagship, but not however, in apparel. Until now.

Made from 100% recycled polyester interlock, Juventus’s third kit fuses performance technology with eco-innovative design.

 

The jersey features a dark grey palette, all-over printed adidas football graphic, and is finished off with bold yellow detailing on the three stripes, logo, and club crest.

The kit’s designer, Francesca Venturini had this to say, “The new Juve third kit has eco-innovation and longevity at its very heart. Through our partnership with Parley for the Oceans we’ve been able to create this beautiful jersey made from Ocean Plastic ®. The dark grey shade with yellow accents makes it the perfect jersey to be worn either on pitch or on the streets.”

The new kit can be purchased on Adidas MY’s website.

 

 

Ajiem Takes The Reigns In The Next Version Of Vans Vision Walk

Vans Vision Walk returns with its next iteration this coming Saturday on the 21st of July, this time bringing more fast paced shooting action with renowned skate photographer, Mohamed Azim Nong, or more affectionally known as Ajiem Serr.

Ajiem is what you can call a veteran in the scene. Having no less than 13 years experience of skateboarding photography, there’s very little that his camera has not yet captured when it comes to encompassing the scene here in it’s entirety. So much in fact, that he compiled his best shots in a book called “Another Day To The Streets: Malaysian Skateboarding Through The Lens,” which had public viewing at White Box, Publika last month to exciting reception.

Much like motorsport photography, skating photography is a very different genre than what most people are used to. The photographer needs to be on their feet, tapping into their creativity on the fly and always ready to capture the perfect shot of often fast moving subjects. To Ajiem, it’s a fun challenge that he’s perfected over the decade of solely documenting the scene.

Patience, is the name of the game, so stay tuned for the follow up where we go and tryout skate photography for ourselves!

 

 

 

The Behavior Of Malaysia’s Streetwear Scene And How It Affects The Resell Market

(The article is an opinion piece and may not reflect the views of Masses in its entirety)

If you’re into sneakers or actively seeking your next streetwear purchase, you would probably realize by now how almost every reseller in Malaysia has the same product for sale. You can see resellers sprouting from every corner, trying to get a slice of the profit cake including non-sneakerheads. The most common brands you’d usually spot would be Supreme, BAPE, Nike or Adidas but the whole point of mentioning this is that all the items are the same whether its a pair of Yeezy 500’s, Air Jordan 1 Shadow, a Supreme SS18 waist bag and more.

The streetwear scene is facing an over-supply of products, not just by resellers, but by giant brands especially. Giant brands are acknowledging the secondary market where their products are being resold for a much higher price which will boost their sales due to the perception of being able to make a profit by resellers. By using simple knowledge of economics when supply is higher than demand, prices of products all fall especially when a new reseller comes in with intentions to make a quick flip and sells at a fairly lower price than everyone else, which further spoils the market by reducing the average market price of products. An example would be the Supreme SS18 waist bag which initially could fetch around RM750 but due to over-saturation of the product in the market, it is easily obtainable at around RM600 to RM650.

 

We all definitely prefer resell prices to drop so that we are more capable to buy our desired streetwear pieces but if you have not realized, the Malaysia streetwear market (post-Boost) have reached a point such if the item isn’t expensive, people desire it less and would rather save up to purchase something with more hype accompanied with a higher resell price. An example would be instead of purchasing a pair of Shadow 1’s for RM750, people would rather spend to pay for a pair of Banned 1’s (2016) for RM1500 just because it’s more expensive, and would be deemed more superior compared to the Shadow 1’s. The Malaysia streetwear scene has reached a plateau as people are in the streetwear scene solely to stay relevant and to show superiority over another with more expensive pieces.

Most Malaysia sneakerheads these days only know what is expensive or what’s hyped but they tend to overlook the cheaper yet rarer pieces just because it doesn’t give as much attention. The reason behind this is because Malaysia sneakerheads measure rarity of sneakers using resell value instead of factors that matter such as production quantity, availability and more. A relatable example would be, everyone knows of Fragment 1’s but are much less familiar with the Art Basel 1’s which was only available for purchase in Miami. The Fragment 1’s were released in 2014, had a restock in 2017, and was released online meaning it was accessible to anyone, yet due to hype, Fragment receives more recognition and more people are willing to spend on a pair of Fragment 1’s instead of the Art Basel 1’s. This point proves that if Malaysia sneakerheads continue to aim for hype, our scene will be flooded with only newly-released, overproduced, hyped pieces rather than rare pieces which elevate our scene to compete with collectors internationally whether in terms of streetwear pieces or sneakers.

 

Before we end, ask yourself, would you really want to see everyone around you (in the streetwear scene) using the same piece as yourself especially after spending a large amount just to obtain it? Do you want to attend a sneaker event wearing the same sneakers as everyone else? We always want the better things, complaining why we can’t get limited releases in Malaysia but before anything, are you willing to do something about our scene? Best to reflect on ourselves before starting to point fingers because the problem may not be them, but us.

 

Is Transparency The New Trend?

It’s been on circulation for quite some time now and everyone worth their salt knows that there’s currently rising popularity with having see-through uppers on their silhouettes, with the Nike React Element 87 being the epicentre of the hype cloud. Adidas too is riding the train, with Kim Kardashian having given a sneak peek at Yeezy’s new and upcoming collection. A new Yeezy 700 with redesigned upper can be seen, but the topic seems to gravitate more on the 350 V2s, which now come with a translucent stripe across the shoe akin to the Beluga V1 pattern.

This concept isn’t a new thing. Where previously it was a female dominated district, more and more designers are including or at least considering adding transparency towards menswear, specifically, sneakers. That being said, different manufacturers have been experimenting with clear uppers but never really bore much fruit. Puma remixed the Clyde with a transparent body sans the toe cup, eyestay, and heel counter with its recent collaboration with Shantell Martin. BAPE experimented too when the Bape Sta clear was released, amid to mixed reception. Reebok flatout deconstructed panels on its Instapump Fury, leaving holes on the medial and lateral sides of the shoe, making for a fairly unique albeit weird silhouette. Even Nike got in on it before this blew up with the release of the Commes Des Garçons SB a few months back.

It doesn’t only stop with shoes. RIMOWA also got in on the act with their recent collaboration with Off-White and forego the aluminium (freaking aluminium) for transparent polycarbonate, effectively challenging the whole principle of privacy when it comes to personal belongings. It’s a literal showpiece for flexing, and nothing else, because obviously the polycarbonate won’t stand to the abuse an aluminium bag can take, much less look better when it’s beaten up with scratches and dents.

The transition and mass adoption of the translucent to transparent types of footwear can be traced back to the Zoom Fly SP, featuring a multi-layered construction that presenting the functional parts of the shoe that contribute to its performance and design. FlyWire can be seen caging the midfoot portion where the laces will be, as well as the heel cushion, with the sock peeking out from the toebox. Consumers were quick to connect dots that brightly coloured or pattern heavy socks allowed for different variations to the silhouette, essentially revealing another layer to the shoe that was previously hidden.

As the Zoomflys were considered running shoes, not many took favour to it, as the foam would crease even on the first wear, but that all changed with the introduction of the React Element 87, featuring a slightly thinner, more sculpted midsole that reduced the problem, or at least the translucent upper distracts from that fact. Hypebeasts then adopted it, took all of it, and proceeded to jack up the prices in a bid to make a quick buck while they can, leaving everyone else to wonder as to why a GR pair costs thrice as much as retail.

It could be that we’re too focused on the niche and not looking at the bigger picture. GQ provided an interesting perspective on Abloh’s oxymoronic statement piece: “After Facebook and Cambridge Analytica made it clear that nothing was hidden to begin with, Abloh’s suitcase serves as a witty rejoinder, and the only possible response. Just put it all out there. It’s all known already.”

What this basically means then, is that see through shoes and accessories serve as an allegorical commentary that nothing is secretive anymore. Overanalysis of a simple feature never went so deep.

 

 

 

Our Prayers Have Been Answered, The M2K Tekno Lands On Our Shores

We don’t have to say much. The Nike M2K Tekno is finally dropping right here in Malaysia, at long last, after months of prayers and wishful thinking. For those still not up to date with what in the world is the M2K Tekno, it’s essentially the successor to Nike’s extremely popular Air Monarch, presenting a much more technological and futuristic cutting compared to its predecessor.

First seen at John Elliot’s fashion show, the M2K garnered plenty of attention and rumours as to whether this is the Air Monarch ‘2.0,’ but all that is dispelled when the Tekno released with an incredibly affordable price tag, harking back to its sibling of old.

The silhouette features complex multi-panel construction with two swooshes, one more visible than the other, with a heel tab and finished off with the signature chunky sole. Two colours are dropping here, the original ‘Phantom White,’ and ‘Black/White.’

While no price is stated, expect the M2K to cost around RM 600 bucks as it releases on July 24th 9 AM local time here. Get your cash and internet ready readers, this is not going to be an easy cop.

More Pictures

Nike X Matthew M Williams Had A Surprise Drop On The Malaysian Site

The Office Managed To Cop 2 Tees

The Nike X MMW collab presents the first partnership for the designer of 1019 Alyx 9SM, and was released last Friday internationally. Normally, we don’t usually get designer collaborations landing on our shores, so it was a major surprise when we found out that Nike Malaysia actually had the whole collection in stock, from the chestrig, legwear combo, headwear, and techwear shirts.

Our videographer managed to cop 2 t-shirts out of the whole collection; the Nike X MMW basic tee in white and beige. Highlights include an enlarged swoosh on the right shoulder blade, Matthew’s name on the right portion of the hip and shirt description on the left side. Double branding is present on the chest to finish off the look. Priced at RM150, the rest of the collection is relatively expensive with the legwear coming in at RM 1099 and women’s chestrig at RM 699.

Did you manage to cop?

Cutting Room Floor

We Explain The Hype Behind The Nike React Element 87

Nike’s been pumping out new tech like how Timberland releases its collaboration models, many in a very short time span. Fresh from the development of the Zoom X, the Swoosh has distilled the tech from the Zoom X and came out with the React foam, a sort of best of both worlds middle ground between bounciness and longevity.

You may have noticed that React made midsoles are not smooth. The design was computationally filtered with algorithms to provide maximum flex and strengthen the sole’s stress points during rebound and lift-off for increased response with every step, hence the odd pattern ingrained into it. The React Element ’87 takes this a step further, by pressure mapping people who walk to everywhere they go, and then drilling holes into spots where the feet experience the most fatigue. This technique was then transferred into the React foam for enhanced comfort.

However, this wasn’t really the reason that people were willing to overpay up to 1400 RM for a pair of these. Partly why the clout was apparent was that the shoe debuted on the runway, at UNDERCOVER’s show in collaboration Nike. Coupled that with a design that looks deconstructed and donned with a translucent upper, helped seal the deal for everyone else.

It’s kind of like a budget Off-White Zoomfly SP, without the crippling price tag, but much much more comfortable than its counterpart thanks to the utilisation of the React foam. Bonus: Cork footbeds are present instead of the normal insoles.

In terms of the arms race when it comes to who can innovate better, it seems like Nike is King Of The Hill, given the limit pushing Zoom X, 3D printed FlyPrint and translucent upper whereas Adidas only has the Futurecraft 4D to bank upon. Regardless, it looks like exciting times ahead for both leaders, and the route where Nike is taking with its uppers could kickstart a trend of see through shoes, but that’s another story altogether. What do you think? Is the hype for the React Element 87 justifiable? Or is it just a boat, waiting to sail from the hype dock?

 

WDHANFTSY: Nike Air Force 1 ‘Playstation’

WDHANFTSY will be playing around in this episode with a pair of Nike Air Force 1 ‘Playstation’, courtesy of one of the Hoarder, Victor Chan (IG: @blacktrix)! Find out Bryan’s (IG: @bryanbotakchin) & Julian’s (IG: julianleong) opinion on the collab with some background history of Sony’s collaboration with Nike.

PS: The number of production for this Nike Air Force 1 ‘Playstation’ is based on rumors that have been going around in the sneaker scene. Do let us know if you have the accurate number!

Zoom X Foam, The Boost Killer?

 

While Adidas is still lauding over the Boost sole, having most recently equipped a half and half Boost heel cushioning with an EVA forefoot in their POD S3.1, Nike has been tooling with whether they should release what they think, will be the foam to rival, or even beat Boost.

And they have.

Recall Nike’s previous effort trying to break the 2-hour mark for a full marathon. Several runners, most notably Eliud Kipchoge were given the task to break the limit, and was supplied with Nike’s experimental Vaporfly Elite, equipped with their state-of-the-art Zoom X to help in the potentially record breaking achievement at Monza Circuit, Italy. Unfortunately they didn’t, only managing to lose out to the limit by 2 minutes, 25 seconds. That’s still a massive fucking breakthrough, because most of us can’t even run 2 kilometres without dying from the strain.

It just goes to show then, just how much Nike is pushing the limits of foam technology with the Zoom X, and despite Adidas still championing the Boost as the next big thing, Nike’s still sticking to material that they know very well, and extracting as much performance as it can from the Zoom foam for maximum speed. Of course, the Vaporfly Elite was all about that, but it’s not without sacrifice. Unlike other Zoom foams which will last 600 miles, the Zoom X foregoes longevity for outright speed, and as such, loses its compression and rebound properties after 1 or 2 full marathon runs.

Consumers couldn’t even get their hands on these; they were exclusively distributed to athletes who participated or whom Nike thought would benefit from. Prying a pair away from their owners meant paying a steep price. A quick look at StockX found that the last pair of the Vaporfly Elite sold for a whopping 1000 USD, and already shows creases as well as risk of midsole decompression. It looked as though that was the end of the tech, an extremely comfortable and bouncy shoe, but at the price of heightened wear.

Or so we thought.

While all of us were fixated with the React foam, a distilled version of the Zoom X, Nike may have just perfected the Zoom X for consumer use, because they’ve just announced the release of the Zoom Pegasus Turbo, employing the Zoom X foam, albeit thinner than the one use on the Vaporfly Elite. We think that with the release of the model, the longevity issues with the Vaporfly Elite is mitigated, and we cannot wait to get our hands on a pair to test. What do you think? Do you think the Zoom X can be a Boost killer? Sound off int he comments below!